Furniture wax can play an effective role in the maintenance of furniture, then, what is the specific process of waxing?
1, waxing
That is, in accordance with a certain proportion of paraffin wax, beeswax and pine tone synthesis of the required standard blend wax. The wax patterns required to mix wax are different, and the ratio of paraffin, beeswax and pine is different. Generally speaking, to get rough wax patterns, pine and paraffin ingredients can be added some, to get fine wax patterns, then beeswax can be appropriate more. /b10> (Depending on the type of wood used and the effect of the formula, you can test it a few times before you can officially carry it out).
2, hot wax
When scalding wax, should be used to spray the outside flame to quickly bake the surface of the furniture parts to be hot wax to make the wood pipe hole expand, while using a brush to extract melted wax, and brush to the wax parts surface, which not only makes liquid wax immersed in wood, closed the tube hole, but also formed a layer of protective film on the surface of the wood, greatly reducing the impact of the external environment on the wood. In addition, hot wax should be pressed from the inside out (i.e. first to the inside of the wood wax, then to the edge inside and back brush wax, and finally to the outer surface of each part brush pull), from top to bottom order.
3, waxing
After the wax is completely solidified, select different types of shovels according to the external shape size of each component and shovel the wax layer attached to the surface of each piece of wood. The direction of the shovel should be consistent with the smooth texture direction of the wood, and the force should be uniform, one shovel at a time, until the entire outer surface of the component is shoveled.
4, rub wax
While quickly baking the shoveled wood with the outside flame of the spray lamp, wipe the part with a soft cotton cloth to remove the undried floating wax and residual wax from it, and finally wipe the wood several times with a soft cotton cloth. Theoretically, the more times you rub, the better.
5, hot wax inspection standards
The natural sheen of the wood should be displayed. Overall should be uniform, corner line type and flower live without the phenomenon of roasting paste. No floating wax, residual wax, the final surface effect to achieve smooth and bright. The internal hot wax part of the wood should be consistent with the outside, smooth and free of burrs.
